Mathematical Modeling of Nylon 6/6,6 Copolymerization in Batch Reactor: Investigating Recipes without Water and with Cyclic Dimer

A model is used to simulate batch copolymerization of caprolactam with hexamethylene diamine (HMD) and adipic acid (ADA) to produce nylon 6/6,6. Four different recipes are considered: a recipe containing caprolactam and an aqueous solution of HMD and ADA, a recipe containing caprolactam and dry HMD/ADA salt, and two recipes with a portion of the caprolactam replaced by nylon 6 cyclic dimer (CD). Consuming CD would be advantageous because CD is an undesirable side product from nylon 6 production. Simulation results lead to three important findings: (i) operation using dry salt rather than aqueous salt solution leads to higher degree of polymerization, (ii) substantial quantities of CD can be consumed to produce nylon 6/6,6 copolymer, and (iii) including water in the recipe is beneficial for achieving improved consumption of CD. The results of this study will be helpful in designing experiments aimed at improving industrial nylon 6/6,6 copolymerization processes.     

Salen–Mg-doped NH2–MIL-101(Cr) for effective CO2 adsorption under ambient conditions

A novel metal-doped metal–organic framework (MOF) was developed by incorporating salen–Mg into NH₂–MIL-101(Cr) structure under ambient conditions. The Schiff base complex was successfully prepared by condensing salicylaldehyde with a free amino group and then coordinating metal ions. Such a structure can endow the sample with higher CO₂ adsorption performance. At 0°C and 1 bar, the salen–Mg-modified sample achieves the maximum adsorption capacity of 2.18 mmol g⁻¹ for CO₂, which was 5.8% higher than the pristine salen–MOF under the same conditions. Notably, the Freundlich model indicates that the CO₂ adsorption process of all samples conforms to reversible adsorption. However, the correlation coefficients (R²) of the Mg-doped sample are lower than that of the pristine sample. Besides, the CO₂/N₂ adsorption selectivity and isosteric heat also show a similar trend. These results indicate that the salen–Mg can enhance the interaction between the material and CO₂ molecules.     

Homogenization of Periodically Heterogeneous Thin Beams

Consider an elastic thin three-dimensional body made of a periodic distribution of elastic inclusions. When both the thickness of the beam and the size of the heterogeneities tend simultaneously to zero the authors obtain three different one-dimensional models of beam depending upon the limit of the ratio of these two small parameters.     

Self-assembly mechanism of PEG-b-PCL and PEG-b-PBO-b-PCL amphiphilic copolymer micelles in aqueous solution from coarse grain modeling

We followed the self-assembly of high-molecular weight MePEG- b -PCL (poly(methyl ethylene glycol)-block-poly(ε-caprolactone)) diblock and MePEG- b -PBO- b -PCL (poly(methyl ethylene glycol)-block-poly(1,2-butylene oxide)-block-poly(ε-caprolactone)) into micelles using molecular dynamics simulation with a coarse grain (CG) force field based on quantum mechanics (CGq FF). The triblock polymer included a short poly(1,2-butylene oxide) (PBO) at the hydrophilic-hydrophobic interface of these systems. Keeping the hydrophilic length fixed (MePEG₄₅), we considered 250 chains in which the hydrophobic length changed from PCL₄₄ or PBO₆- b -PCL₄₃ to PCL₆₂ or PBO₉- b -PCL₆₁. The polymers were solvated in explicit water for 2 μs of simulations at 310.15 K. We found that the longer diblock system undergoes a morphological transition from an intermediate rod-like micelle to a prolate-sphere, while the micelle formed from the longer triblock system is a stable rod-like micelle. The two shorter diblock and triblock systems show similar self-assembly processes, both resulting in slightly prolate-spheres. The dynamics of the self-assembly is quantified in terms of chain radius of gyration, shape anisotropy, and hydration of the micelle cores. The final micelle structures are analyzed in terms of the local density components. We conclude that the CG model accurately describes the molecular mechanisms of self-assembly and the equilibrium micellar structures of hydrophilic and hydrophobic chains, including the quantity of solvent trapped inside the micellar core.     

Lamb波频域逆散射全聚焦成像方法研究

Lamb波因其传播距离远、衰减小常被用于板状结构的无损检测中,在基于Lamb波损伤检测的诸多成像技术中,全聚焦方法(Total Focus Method,TFM)方法因其成像分辨率高、信噪比高而受青睐。然而Lamb波的频散效应导致时域延时量不能被准确计算,进而影响传统TFM方法对损伤定位及成像的精度;此外,既有的TFM方法仅以回波幅值作为成像指标,忽略了Lamb波与损伤的相互作用,故而不能通过损伤表面的物理参数增强成像质量。针对这两个问题,本文首先在时域TFM基础上发展了频域TFM,在计算中纳入频散关系以规避频散的影响;其次以包含明确的损伤特征参数--反射率为成像指标,结合频域TFM方法建立损伤逆散射模型,以实现对损伤的准确成像。仿真和实验结果表明:频域逆散射TFM成像方法能够实现对铝板结构中的损伤检测,在工程实践中具有应用价值。     

基于NPP-VIIRS夜间灯光数据的山西省GDP空间化模拟

选取山西省为研究对象，以美国国家极轨合作仪件-可见红外成像辐射计套件（NPP-VIIRS）夜间灯光数据、GDP统计数据等为数据源，构建GDP空间化拟合模型，建立山西省GDP密度图，据此研究山西省经济的空间差异性。通过对NPP-VIIRS夜间灯光数据的空间化处理，提取灯光指数，并将其与GDP进行回归拟合，建立最佳回归模型，得到GDP密度拟合图；利用县级GDP数据进行线性纠正，从而提高GDP的模拟精度。结果表明：（1）NPP-VIIRS夜间灯光数据与GDP的相关性较高，可用于山西省GDP模拟；（2）与GDP分区建模相比，GDP整体建模的精度更高；（3）山西省GDP的空间分布整体呈由城市中心逐渐向周边辐射的特点，构成GDP过渡带。     

An asymptotic Reissner–Mindlin plate model

A mathematical study via variational convergence of a periodic distribution of classical linearly elastic thin plates softly abutted together shows that it is not necessary to use a different continuum model nor to make constitutive symmetry hypothesis as starting points to deduce the Reissner–Mindlin plate model.     

Optical and static dielectric study of a terminally fluorinated liquid crystalline compound

Optical and static dielectric studies on a terminally fluorinated liquid crystalline compound have been carried out. Measurements of temperature variation of refractive indices of the compound are done by using thin prism method. A four-parameter model is validated by fitting the experimentally measured values of refractive indices, birefringence and average refractive indices of the compound with the theoretical ones. Refractive index and density data are utilized for determination of orientational order parameter. The temperature variation of dielectric permittivities of the compound are measured by a LCR meter.     

Aeroelastic analysis of cantilever plates using Peters’ aerodynamic model,and the influence of choosing beam or plate theories as the structural model

In this paper, the aeroelastic analyses of a rectangular cantilever plate of varying aspect ratio is presented. The classical plate theory has been selected as the structural model. The main point that distinguishes this study from previously reported research is employing Peters’ theory to model aerodynamic effect which is not straightforward. The Peters’ aerodynamic model was originally developed to provide lift and moment, which is only applicable to the structural model based on the beam theories. In this study, using the basic concept of the Peters’ aerodynamic model in addition to utilizing the Fourier series, the pressure distribution is derived, which makes Peters’ model applicable to structural models based on plate theory. This combination provides a much simpler state–space aeroelastic model for plates in comparison to the prevalent panel methods, which could lead to a significant reduction in computational time. In addition, the aeroelastic response of the plate with respect to changes in the structural model from the beam theory to the plate theory is evaluated. By using data from an experiment carried out at Duke University, the theoretical results are evaluated. Furthermore, the differences in structural models obtained from the plate and beam theories can be divided into two distinct parts, which are responsible for differences in bending and torsional behaviors of the structure, separately. This approach enables us to measure the effects of differences of each behavior separately, which could provide with a new insight into the problem. It has been determined that the flutter speeds obtained from the beam and plate aeroelastic models are little affected by the difference in bending behavior, but rather is mainly caused by the difference in torsional frequencies.     

AlGaN/GaN高电子迁移率器件外部边缘电容的物理模型

AlGaN/GaN HEMT外部边缘电容Cofd是由栅极垂直侧壁与二维电子气水平壁之间的电场构成的等效电容.本文基于保角映射法对Cofd进行物理建模,考虑沟道长度调制效应,研究外部偏置、阈值电压漂移和温度变化对Cofd的影响:随着漏源偏压从零开始增加,Cofd先保持不变再开始衰减,其衰减速率随栅源偏压的增加而减缓;AlGaN势垒层中施主杂质浓度的减小和Al组分的减小都可引起阈值电压的正向漂移,正向阈值漂移会加强沟道长度调制效应对Cofd的影响,导致Cofd呈线性衰减.在大漏极偏压工作情况下,Cofd对器件工作温度的变化更加敏感.